Shodan

66.29.154.189

Regular View Raw Data Timeline
Last Seen: 2025-03-29
Tags:
starttls

GeneralInformation

Hostnames coinbank.md
server1.coinbank.md
autoconfig.server1.coinbank.md
autodiscover.server1.coinbank.md
cpanel.server1.coinbank.md
cpcalendars.server1.coinbank.md
cpcontacts.server1.coinbank.md
ipv6.server1.coinbank.md
mail.server1.coinbank.md
webdisk.server1.coinbank.md
webmail.server1.coinbank.md
whm.server1.coinbank.md
www.server1.coinbank.md
Domains coinbank.md 
Country United States
City Sacramento
Organization Namecheap, Inc.
ISP Namecheap, Inc.
ASN AS22612

WebTechnologies

Vulnerabilities

Note: the device may not be impacted by all of these issues. The vulnerabilities are implied based on the software and version.

2025(1)
CVE-2025-26465
6.8A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high.
2023(6)
CVE-2023-51767
7.0OpenSSH through 9.6, when common types of DRAM are used, might allow row hammer attacks (for authentication bypass) because the integer value of authenticated in mm_answer_authpassword does not resist flips of a single bit. NOTE: this is applicable to a certain threat model of attacker-victim co-location in which the attacker has user privileges.
CVE-2023-51385
6.5In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name.
CVE-2023-48795
5.9The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust.
CVE-2023-38408
9.8The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.
CVE-2023-30500
5.8Unauth. Reflected Cross-Site Scripting (XSS) vulnerability in WPForms WPForms Lite (wpforms-lite), WPForms WPForms Pro (wpforms) plugins <= 1.8.1.2 versions.
CVE-2023-7063
7.2The WPForms Pro plugin for WordPress is vulnerable to Stored Cross-Site Scripting via form submission parameters in all versions up to, and including, 1.8.5.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
2021(2)
CVE-2021-41617
7.0sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.
CVE-2021-36368
3.7An issue was discovered in OpenSSH before 8.9. If a client is using public-key authentication with agent forwarding but without -oLogLevel=verbose, and an attacker has silently modified the server to support the None authentication option, then the user cannot determine whether FIDO authentication is going to confirm that the user wishes to connect to that server, or that the user wishes to allow that server to connect to a different server on the user's behalf. NOTE: the vendor's position is "this is not an authentication bypass, since nothing is being bypassed.
2020(2)
CVE-2020-15778
7.8scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of "anomalous argument transfers" because that could "stand a great chance of breaking existing workflows."
CVE-2020-14145
5.9The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.
2019(3)
CVE-2019-6111
5.9An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).
CVE-2019-6110
6.8In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.
CVE-2019-6109
6.8An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.
2018(3)
CVE-2018-20685
5.3In OpenSSH 7.9, scp.c in the scp client allows remote SSH servers to bypass intended access restrictions via the filename of . or an empty filename. The impact is modifying the permissions of the target directory on the client side.
CVE-2018-15919
5.3Remotely observable behaviour in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states 'We understand that the OpenSSH developers do not want to treat such a username enumeration (or "oracle") as a vulnerability.'
CVE-2018-15473
5.3OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c.
2017(1)
CVE-2017-15906
5.3The process_open function in sftp-server.c in OpenSSH before 7.6 does not properly prevent write operations in readonly mode, which allows attackers to create zero-length files.
2016(1)
CVE-2016-20012
5.3OpenSSH through 8.7 allows remote attackers, who have a suspicion that a certain combination of username and public key is known to an SSH server, to test whether this suspicion is correct. This occurs because a challenge is sent only when that combination could be valid for a login session. NOTE: the vendor does not recognize user enumeration as a vulnerability for this product
2008(1)
CVE-2008-3844
9.3Certain Red Hat Enterprise Linux (RHEL) 4 and 5 packages for OpenSSH, as signed in August 2008 using a legitimate Red Hat GPG key, contain an externally introduced modification (Trojan Horse) that allows the package authors to have an unknown impact. NOTE: since the malicious packages were not distributed from any official Red Hat sources, the scope of this issue is restricted to users who may have obtained these packages through unofficial distribution points. As of 20080827, no unofficial distributions of this software are known.
2007(1)
CVE-2007-2768
4.3OpenSSH, when using OPIE (One-Time Passwords in Everything) for PAM, allows remote attackers to determine the existence of certain user accounts, which displays a different response if the user account exists and is configured to use one-time passwords (OTP), a similar issue to CVE-2007-2243.

OpenPorts

21 / tcp
1197560956 | 2025-03-23T18:43:57.447729
22 / tcp
1819435365 | 2025-03-28T09:08:10.819208
53 / tcp
-1346977621 | 2025-03-27T16:25:12.490161
53 / udp
-1346977621 | 2025-03-23T15:19:17.498966
80 / tcp
1817017678 | 2025-03-22T18:18:33.814348
110 / tcp
1952082069 | 2025-03-16T23:08:07.072064
143 / tcp
1559185454 | 2025-03-14T11:15:39.941189
443 / tcp
1444451173 | 2025-03-29T01:33:21.567194
465 / tcp
-698192389 | 2025-03-20T11:49:16.166522
995 / tcp
-1001764030 | 2025-03-25T23:12:11.379924
2082 / tcp
109732936 | 2025-03-11T19:44:57.927121
2083 / tcp
595268067 | 2025-03-18T02:09:46.989385
2086 / tcp
-1117939231 | 2025-03-14T04:30:28.290356
2087 / tcp
829397180 | 2025-03-28T23:39:00.079830



Products
Pricing
Contact Us

Shodan ® - All rights reserved